Graphtec CE6000-40 PLUS Vinyl Cutter / Cutting Plotter

item #194543256

$776.75

Product Description

Graphtec CE-6000 PLUS Vinyl Cutter Plotter

The Graphtec CE6000-40 PLUS has 450 gf of downforce pressure for cutting very thin films such as window tint* all the way up to the toughest sand-blast mask and reflective materials. It has a max cutting speed of 39 in/sec (in all directions) for quick output of intricate cut jobs. It also includes Graphtec Pro Studio, a complete design and cutting software solution similar to Illustrator or CorelDRAW.

*Tint cutting is available in the CE6000–120 AKZ configuration, and comes installed with Anti–Static Cords for front and rear which reduces the static electricity that is so common with tint films that can restrict media movement.

Reliable long length tracking up to 196.85 inchs long

The built-in front control panel provides complete parameter control including eight preset cutting conditions, as well as advanced features like tangential control mode, down force offset, pen up speed, blade wear monitoring and more. With a 25 pin RS-232C or the High Speed USB 2.0 control interface, the CE6000 Plus Series is compatible with legacy computer systems as well as the latest PCs available now and for several years to come.

Dual tool configuration and easy switching between cutting and plotting

The pen carriage holds both a plotting pen and a blade at the same time — to enable easy switching between plotting and cutting operations. Four sets of user-specified setup parameters are retained in memory for instantaneous recall. The pen is for plotting and detailing graded patterns with seams, text, notches, Grain direction, etc.

Enhanced speed when cutting

Innovative features include maximum cutting speeds of 39 ips and with a maximum cutting force of 450g. It also features an easy to use menu navigation system with eight groups of preset conditions which facilitates instantaneous recall of pre-programmed job-specific plotter setups.

Each CE6000 comes standard with: floor stands (except for the 15" CE-6000-40), Rear media roll rack with new media brake (60" and 120"), Graphtec Studio Software, Cutting Master Plug-In, plus Graphtec's ARMS (Automatic Registration Mark Sensor) system.

ARMS 5.0 for high precision cutting in the print and cut application

ARMS is an abbreviation for Advanced Registration Mark Sensing system, which uses sensors to detect registration marks and performs the AXIS ALIGNMENT. It is able to adjust received contour cutting data in the cutting plotter to align with the printed image. It enables to significantly improve productivity in the Print & Cut applications that makes stickers or decals.

The new CE-6000 PLUS model includes:

Graphtec PRO Studio Software
Software can drive multiple cutters simultaneously
Software automatically auto-detects any cutter once plugged into USB port
Stand Included with 24" and 48" models (Not available with 15" model)
Not included but compatible:
- Adobe Illustrator (PC and Mac)
- CorelDraw (PC)

Product Specification

Model		CE6000-40 PLUS	CE6000-60 PLUS	CE6000-120 PLUS
Configuration		Grit roller with digital servo drive system
Maximum cutting area (W x L)		14.76 in x 164 ft 0.5 in (375 mm × 50 m) (*1)	23.74 in x 164 ft 0.5 in (603 mm × 50 m) (*1)	47.75 inc x 164 ft 0.5 in (1213 mm × 50 m) (*1)
Cutting area of guaranteed accuracy(W x L) (when using the basket)		14.01 in x 6 ft 6.74 in (356 mm × 2 m) (*1)	1 ft 11 in x 16 ft 4.85 in (584 mm × 5 m) (*1)	3 ft 11 in x 16 ft 4.85 in (1194 mm × 5 m) (*1)
Mountable media width		Min. 1.96 in to Max.19.05 in (Min. 50 mm to Max. 484 mm)	Min. 1.97 in to Max. 28.03 in (Min. 50 mm to Max. 712 mm)	Min. 4.7 in to Max. 53 in (Min. 120 mm to Max. 1346 mm)
Number of push rollers		2 rollers		3 rollers
Maximum cutting speed		1 ft 11.6 in/s (600 mm/s), in all directions	900 mm/s, at 45º angle	1000 mm/s, at 45º angle
Maximum acceleration		69.55 ft (21.2 m/s²), at 45º direction		45.60 ft (13.9 m/s²), at 45º direction
Maximum cutting force		4.41 N (450 gf) in 38 steps
Minimum character size		Approx. 5 mm alphanumeric (varies depending on character font and type of media)
Programmable resolution		GP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm, HP-GL™: 0.025 mm
Repeat-ability		Max. 0.1 mm in plot up to 2 m (*1)
Mountable number of tools		1 tool
Blade type		Supersteel
Pen type		Oil-based ballpoint, Water-based fiber-tip pen
Media type		Self-adhesive marking film (vinyl, fluorescent, reflective) excluding high-intensity reflective film, up to 0.25 mm thickness Polyester film, up to 0.25mm thickness (unguaranteed accuracy)
Interface		RS-232C, USB2.0
Buffer memory		2 MB
Command sets		GP-GL / HP-GL™ emulation (Set by command or auto-detect)
Display		Graphic type LCD with back-light (240dots x 128dots), supports 10 languages
Registration mark sensing system		Marks are scanned by an optical sensor (ARMS5.0), Segment area and Multiple marks compensation, 4-points axis alignment, Auto mark detect
Alignment accuracy		Maximum 0.3 mm with printed image (when reading registration marks specified by this machine)
Power source		100 to 120, 200 to 240 V AC (Auto switch), 50 / 60 Hz
Power consumption		120 VA
Operating environment		10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
Guaranteed accuracy environment		16 to 32 ºC, 35 to 70 % R.H. (non-condensing)
External dimensions (W x D x H)		Approx. 26.45 x 13.30 x 10.47 in (672 × 338 × 266 mm)	Approx. 35.43 x 23.34 x 41.18 in (900 × 593 × 1046 mm)	Approx. 60.67 x 28.97 x 49.21 in (1541 × 736 × 1250 mm)
Weight		Approx. 23.14 lb (10.5 kg)	Approx. 46.29 lb (21 kg) (including stand 17.85 lb, 8.1 kg)	Approx. 89.28 lb (40.5 kg) (including stand 36.15lb, 16.4 kg)
Compatible OS (*2)		Windows 10 / 8.1 / 8 / 7 Mac OSX 10.6 - 10.14
Included software		Cutting Master 4, Graphtec Pro Studio (for Windows), Graphtec Studio (for Mac), Windows driver, Cutting Plotter Controller
Compatibility Standards	Safety	UL / cUL, CE mark, RoHS Directive
Compatibility Standards	EMC	VCCI Class A, FCC Class A, EN55022 Class A